Lancia Delta Turbo 4×4 (831) '04.1982progettato da Italdesign

Lancia Delta Turbo 4×4 (831) '04.1982
Lancia Delta Turbo 4×4 (831) '04.1982
Lancia Delta Turbo 4×4 (831) '04.1982
 

Lancia presented 4×4 prototype at the 1982 Turin Motor Show. The prototype kept the original model's basic mechanicals, but it had a 1600 cc engine supercharged by turbocompressor, delivering an output of 130 HP. Permanent transmission to all four wheels was obtained by adding a torque-splitter with longitudinal drive for rear-wheel transmission to the original gearbox-differential unit. A two-section shaft transmits drive to the self-locking rear differential. The most important novelty from the Lancia Experimental Workshop was this torque-splitter differential which was inserted into the engine/transverse gearbox unit and the crown wheel and pinion for transmission to the rear wheels.

Lancia Delta HF UK-spec (831) '1983–85progettato da Italdesign

Lancia Delta HF [UK-spec] (831) '1983–85
 
Lancia Delta HF [UK-spec] (831) '1983–85
 

Lancia Delta HF (831) '1983–85progettato da Italdesign

Lancia Delta HF (831) '1983–85
Lancia Delta HF (831) '1983–85
Lancia Delta HF (831) '1983–85
Lancia Delta HF (831) '1983–85

Lancia Delta HF Martini (831) '1984progettato da Italdesign

Lancia Delta S4 Prototipo (SE038-003) '1984Prodotto in una singola copia

Lancia Delta S4 Prototipo (SE038-003) '1984
 
 
Interni Lancia Delta S4 Prototipo (SE038-003) '1984

Lancia A112 LX '1984–85

Lancia A112 LX '1984–85
 
 
 

Lancia Delta S4 Group B (SE038) '1985

Lancia Delta S4 Group B (SE038) '1985
Lancia Delta S4 Group B (SE038) '1985
Lancia Delta S4 Group B (SE038) '1985
Pannello anteriore Lancia Delta S4 Group B (SE038) '1985

precedenteprossimo

0102030405060708091042

WheelsAge.org '2005–pres.